Plate and profile storage: Covered Area 7000 m2 Cranes 2 x 2 x 25 t Plate and profile parts shop: Plate lane and profile lane, total area 10.000 m2 Cranes 6 x ( 12 -25 t) Facilities: plate cutting (plasma and oxygen     press ( 3000 kN )     bending machine ( 6000 kN )     rolling machine ( 6000 kN )     profile bender     profile cutting robot     small panel line ( 4 x 60 m )     welding floor for small assemblies ( 600 m2 )

Pipe shop:

	Area 3000 m2
	Cranes 2 x 10 t
	Facilities for sawing, cutting, bending, welding, pressing and testing pipes
	Facilities for cutting, sawing, shearing, bending, drilling, welding, labeling smaller parts and subassemblies

Assembling and welding shops:

Total area of 6000 m2 on 3 covered slipways, in use by Amels Schelde as assembling and welding stations

Transport:

Trolley and barge: (see transport facilities at Schelde-Oost)

Covered building docks:

	Dock1:	dock dimensions cover hoisting capacity	145 x 18 / 23 x 8.75m 162 x 34 x 25m 1 x 32 tons + 1 x (2 x 32) tons
	Dock2:	dock dimensions cover hoisting capacity adjacent to dock 2	204 x 22 x 8.2m 218 x 34 24.8m 3 x 50 tons 3000m2 stores with climate controlled room of 800 m2

Harbour:

	Maximum passage of lock:	140 x 20.5 x 7.9m at normal waterlevel of harbour
	Waterdepth in harbour:	5.5 - 8m
	Outfitting quays	170m
	Roro quays	700 and 1000 tons
	Mooring quay	320m

Newbuilding facilities available at Schelde-Oost:

Assembly and welding: Assembly hall 1: L x B x H: Cranes: Door B x H: 89.8 x 35 x 34.3m 2 x (2 x 25) tons 35 x 30m Assembly hall 2: L x B x H: Cranes: Doors B x H: 91.2 x 38 x 31.7m 2 x 50 tons 36 x 25m Paintshop: Max. dooropenings: B x H: 19 x 12m Conditioning hall: L x B: 20 x 19m 1 shotblasting hall L x B: 40 x 20m 1 sprayhall: L x B: 20 x 19m 1 sprayhall: L x B: 40 x 20m

Assembling and welding shops:

Larger panel line for panels up to 18 x 13 m with horizontal turntable

Building or repair docks:

	graving-dock 1:	dimensions (L x B) doorframe 2 cranes	175 x 25.3m - 6.55 NAP 55/18 and 35 tons	Will be covered 2003/2004 Cranes inside building above dock 2 x (2 x 75) tons
	graving-dock 2:	dimensions (L x B) doorframe 2 cranes 2 gantry cranes	215 x 29.5m -7.6 NAP 55/18 and 35 tons 2 x (2 x 125) tons, hoisting height 33.7m a.q.
	dock 3, floating	dimensions (L x B) waterheight above blocks: cranes	204.4 x 36.4 (pontoondeck) 7.5m 2 x 12 tons, 1 x 40/12.5 tons

Quays:

	outfittingquay E	length waterdepth cranes	280m 11m, tide dependant 40/16 and 30/12.5 tons
	load-out quay:	dimensions: capacity	20 x 30m 7.5 tons/m2
	roro quay		to receive pontoon on sandbed to supply or remove sections/blocks

Transport:

	Trolley (135t)	hydraulically driven	also useable at Vlissingen site
	RoRoBarge L x B x D:	50 x 15 x .31m, capacity 1000 tons	also useable at Vlissingen site